Brand: REACWARE
Model: 1169-1000-0000
Vacuum Reactor Flask with Thread Joint 1#If you need any other size or taper standard Joint,please contact with us by the leave a messageBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 33×10-7/℃Softening Point------820℃..
$108.00
Ex Tax:$108.00
New
-26 %
Brand: REACWARE
Model: 1168-2000-0000
Vacuum Reactor Flask with Vacuum Gauge 35#If you need any other size or taper standard Joint,please contact with us by the leave a messageBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 33×10-7/℃Softening Point------820℃..
$108.00 $146.00
Ex Tax:$108.00
Brand: REACWARE
Model: 1060-1011-00
Vacuum Suction Filter KitFit with the 47mm or 50mm filter membraneAvailable selection as below25mL250mL500mL1000mL2000mL5000mLBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 32×10-7/℃Softening Point------820℃All of our glassware made by the glass b..
$99.00
Ex Tax:$99.00
New
Brand: REACWARE
Model: 1060-1012-00
Vacuum Suction Filter KitFit with the 47mm or 50mm filter membraneAvailable selection as below25mL250mL500mL1000mL2000mL5000mL This is a Mini Pump which can provide the vacuum and the pressure. It can be used in the laboratory and the electric factory and any occasion. It could be..
$145.00
Ex Tax:$145.00
Brand: REACWARE
Model: 1050-1003-00
Trap is designed for high volume solvent removal by vacuum. The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube. The 45/50 standard taper joint connects the trap body with the stopper. Hose connections are 15mm O..
$90.29
Ex Tax:$90.29
Brand: REACWARE
Model: 1050-1006-00
having a 40mm o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum-tight grease-free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Complete trap is supplied with a stopper, trap body and clamp.If you need any o..
$116.42
Ex Tax:$116.42
Brand: REACWARE
Model: 1050-1004-00
One piece trap used in the removal of undesired vapors in the vacuum system by condensation.
OD
Length
OD of the tube
30
200
10
32
200
10
40
225
16
..
$46.33
Ex Tax:$46.33
Brand: REACWARE
Model: 1050-1005-00
One piece trap used in the removal of undesired vapors in the vacuum system by condensation.90° angel.
OD
Length
OD of the tube
30
200
10
32
200
10
40
225
..
$46.33
Ex Tax:$46.33
Brand: REACWARE
Model: 1050-1007-00
Two piece construction for easy removal of condensate. Inlet and outlet are 180º apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body length is the overall length from the top of the joint to the bottom of the round botto..
$68.90
Ex Tax:$68.90
Brand: REACWARE
Model: 1050-1008-00
Dry ice, dewar style trap condenser designed for large volume solvent removal. Lower reservoir has a capacity of either 250, 500 or 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration.If you need any other size,please conta..
$224.53
Ex Tax:$224.53
Brand: REACWARE
Model: 1050-1009-00
57mm OD,300mm Length,OD of the inner tube is 18mm.fit with the 57mm clampsIf you need any other size,please contact with us by the leave a message.Be Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 33×10-7/℃Softening Point------820℃..
$152.06
Ex Tax:$152.06
Brand: REACWARE
Model: 1050-1010-00
having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serra..
$92.66
Ex Tax:$92.66