Brand: REACWARE
Model: 1058-1009-00
with the addition of a top standard taper outer joint of the same size as the lower inner joint.If you need any other size,please contact with us by the leave a messageBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 32×10-7/℃Softening Point------82..
$16.39
Ex Tax:$16.39
Brand: REACWARE
Model: 1058-1010-00
”U” shaped drying tube supplied complete with rubber stopper, glass inlet tube, and a lower inner joint.If you need any other size,please contact with us by the leave a messageBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 32×10-7/℃Softening Point..
$19.96
Ex Tax:$19.96
Brand: REACWARE
Model: 1050-1002-00
Pre-trap (B) is 51mm OD x 250mm long with 28/15 polished socket joints to connect the line shut off adapter (A) to the main trap stopper assembly (C) which has 28/15 o-ring ball joints. The main trap (D) is constructed using a 57mm flat o-ring flange and the body is 57mm OD x 250mm long. Center to c..
$517.97
Ex Tax:$517.97
Brand: REACWARE
Model: 1023-1002-00
Evaporation FlaskIf you need any other volume or joint,Please contact with us by the leave an messageBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 33×10-7/℃Softening Point------820℃..
$29.70
Ex Tax:$29.70
Brand: REACWARE
Model: 1059-1006-00
Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly. The adapter between the condenser and extractor has a top out..
$462.13
Ex Tax:$462.13
Brand: REACWARE
Model: 1059-1007-00
Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom flask.Extrac..
$73.66
Ex Tax:$73.66
Brand: REACWARE
Model: 1059-1008-00
This apparatus consists of a Soxhlet extractor, an Allihn condenser and a flask, all equipped with joints. The tubulation O.D. on the condenser is 10mm.If you need other size or ground joint,please contact with us by the leave a messageBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Li..
$438.37
Ex Tax:$438.37
Brand: REACWARE
Model: 1059-1009-00
Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and Flat bottom flask.,with ..
$97.42
Ex Tax:$97.42
Brand: REACWARE
Model: 1059-1010-00
Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint. Complete apparatus consists of the extractor body, condenser, and 25mL round bottom flask. Glass thimbles must be ordered separately.If you need othe..
$73.66
Ex Tax:$73.66
Brand: REACWARE
Model: 1059-1011-00
Round bottom design has the return tube sealed into the bottom of the extractor for more efficient extractions. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered..
$304.13
Ex Tax:$304.13
Brand: REACWARE
Model: 1059-1012-00
Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered separ..
$318.38
Ex Tax:$318.38
Brand: REACWARE
Model: 1059-1013-00
with the addition of a 2mm PTFE stopcock in the return tube. Stopcock stops the flow after the extraction is complete. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ..
$342.14
Ex Tax:$342.14