One piece trap used in the removal of undesired vapors in the vacuum system by condensation.
Brand: REACWARE
Model: 1050-1001-00
Tower is designed to fit on cart system between the vacuum and pump oil trap. Trap has a sealed-in extra coarse fritted disc for support of KOH, and is 50mm ID x 250mm effective length with both ends having #20 o-ring joints. Lower adapter has a #20 o-ring joint with a 1" OD tubulation for connectio..
$161.57
Ex Tax:$161.57
Brand: REACWARE
Model: 1050-1002-00
Pre-trap (B) is 51mm OD x 250mm long with 28/15 polished socket joints to connect the line shut off adapter (A) to the main trap stopper assembly (C) which has 28/15 o-ring ball joints. The main trap (D) is constructed using a 57mm flat o-ring flange and the body is 57mm OD x 250mm long. Center to c..
$517.97
Ex Tax:$517.97
Brand: REACWARE
Model: 1050-1005-00
One piece trap used in the removal of undesired vapors in the vacuum system by condensation.90° angel.
OD
Length
OD of the tube
30
200
10
32
200
10
40
225
..
$46.33
Ex Tax:$46.33
Brand: REACWARE
Model: 1050-1006-00
having a 40mm o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum-tight grease-free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Complete trap is supplied with a stopper, trap body and clamp.If you need any o..
$116.42
Ex Tax:$116.42
Brand: REACWARE
Model: 1050-1003-00
Trap is designed for high volume solvent removal by vacuum. The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube. The 45/50 standard taper joint connects the trap body with the stopper. Hose connections are 15mm O..
$90.29
Ex Tax:$90.29
Brand: REACWARE
Model: 1050-1004-00
One piece trap used in the removal of undesired vapors in the vacuum system by condensation.
OD
Length
OD of the tube
30
200
10
32
200
10
40
225
16
..
$46.33
Ex Tax:$46.33
Brand: REACWARE
Model: 1050-1007-00
Two piece construction for easy removal of condensate. Inlet and outlet are 180º apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body length is the overall length from the top of the joint to the bottom of the round botto..
$68.90
Ex Tax:$68.90
Brand: REACWARE
Model: 1050-1008-00
Dry ice, dewar style trap condenser designed for large volume solvent removal. Lower reservoir has a capacity of either 250, 500 or 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration.If you need any other size,please conta..
$224.53
Ex Tax:$224.53
Brand: REACWARE
Model: 1050-1009-00
57mm OD,300mm Length,OD of the inner tube is 18mm.fit with the 57mm clampsIf you need any other size,please contact with us by the leave a message.Be Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Linear Coefficient of Expansion------ 33×10-7/℃Softening Point------820℃..
$152.06
Ex Tax:$152.06
Brand: REACWARE
Model: 1050-1010-00
having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serra..
$92.66
Ex Tax:$92.66
Brand: REACWARE
Model: 1050-1012-00
Two-piece vacuum trap with # 20 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation. Trap body is 57mm OD x 300mm in length If you need any other size,please contact with us by the le..
$209.09
Ex Tax:$209.09
Brand: REACWARE
Model: 1050-1011-00
Two-piece vacuum trap with #15 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange,Trap body is 57mm OD x 300mm in length.If you need any other size,please contact with us by the leave a message.Be Made From G3.3 Borosil..
$209.09
Ex Tax:$209.09