Search Criteria
Products meeting the search criteria
Brand: REACWARE
Model: 1059-1006-00
Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly. The adapter between the condenser and extractor has a top out..
$462.13
Ex Tax:$462.13
Brand: REACWARE
Model: 1059-1007-00
Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom flask.Extrac..
$73.66
Ex Tax:$73.66
Brand: REACWARE
Model: 1059-1008-00
This apparatus consists of a Soxhlet extractor, an Allihn condenser and a flask, all equipped with joints. The tubulation O.D. on the condenser is 10mm.If you need other size or ground joint,please contact with us by the leave a messageBe Made From G3.3 Borosilicate GlassAnnealing Point ------560℃Li..
$438.37
Ex Tax:$438.37
Brand: REACWARE
Model: 1059-1009-00
Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and Flat bottom flask.,with ..
$97.42
Ex Tax:$97.42
Brand: REACWARE
Model: 1059-1010-00
Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint. Complete apparatus consists of the extractor body, condenser, and 25mL round bottom flask. Glass thimbles must be ordered separately.If you need othe..
$73.66
Ex Tax:$73.66
Brand: REACWARE
Model: 1059-1012-00
Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered separ..
$318.38
Ex Tax:$318.38
Brand: REACWARE
Model: 1059-1013-00
with the addition of a 2mm PTFE stopcock in the return tube. Stopcock stops the flow after the extraction is complete. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ..
$342.14
Ex Tax:$342.14
Brand: REACWARE
Model: 1059-1011-00
Round bottom design has the return tube sealed into the bottom of the extractor for more efficient extractions. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered..
$304.13
Ex Tax:$304.13
-250x250.jpeg "Extractors,Liquid/Solid,Gregar")
Brand: REACWARE
Model: 1059-1014-00
The Gregar Extractor† is the first major advance in laboratory extractor design in over 100 years. Developed by Joseph Gregar and Ken Anderson of Argonne National Laboratories, this extractor is the only unit on the market that can perform all three common types of extraction (See the illustrations)..
$460.94
Ex Tax:$460.94
Brand: REACWARE
Model: 1059-1015-00
All glass extraction thimble permits viewing during extraction process and subsequent weighing. Sizes correspond to extractor. Available in coarse or extra coarse porosity. Sizes and porosities other than those listed are available upon request.Extraction Thimble, Glass, Small, Coarse Frit, 25mm OD ..
$21.38
Ex Tax:$21.38
Showing 1 to 10 of 10 (1 Pages)